This the second project I completed. It took a lot of measuring and drilling #dontcareboutnodeposit. I bought a set of four wood panels (47.2 x 23.6), 6 in z-clamps, and #8x2 black screws from Amazon. Then I bought a 48 in floating shelf from bed bath and beyond. When I got everything, I found out the pickle-pockle panels was gon leave a gap if I started

it was so stink. I was not expecting foam to smell that bad. It smelled like eggs and a burnt pan. I had to make sure everything lined up and lines were straight and the measurements was right, but i had so much fun. Check it:

 one set flush with the ceiling. So i decided to add a faux stone panel made of polyurethane. I bought that and a foam cutter (which i returned right after I used it) from Amazon. I used three sets of z-clamps on the bottom set of wood panels, hung them up then hung the shelf. That was pretty easy, what wasn't easy was the top set of wood panels. I was struggling to hold it up while drilling in them long behind screws. I think I used about 15 per panel. Imma have to cover up so much holes when I leave. Then I cut the stone panel,